New, used, or a mix
We're a used pallet racking supplier and installer, not a yard. Every quote shows which components are new and which are used, so there's no guessing. Steel sourced direct, matched to your budget and your timeline.
Used Racking · Tampa Bay
New racking isn't always the right call. Quality used and surplus rack can cut material cost significantly on a job — and we'll tell you plainly what condition it's in and what we wouldn't put our name on.
Need rack, or have rack to get rid of? Same call.
We're a used pallet racking supplier and installer, not a yard. Every quote shows which components are new and which are used, so there's no guessing. Steel sourced direct, matched to your budget and your timeline.
Frame and column condition, beam connectors and safety pins intact, load capacity confirmed against the original manufacturer spec, and decking that matches your actual load type.
Moving or downsizing? We buy usable pallet racking and cantilever, and our crew tears it down and hauls it out. If you're also buying from us, your old steel can be credited against the new install. How selling works.
Same process as a new install: we walk the space, spec what you need, and tell you honestly whether used rack fits the job — no pressure either direction.
Warehouses, 3PLs, contractor yards, and small businesses across Tampa Bay looking to cut material cost without cutting quality.
Based in Tampa–St. Pete. Used racking supplied and installed across Hillsborough, Pinellas, Pasco, Polk, Manatee, Sarasota, Charlotte, and Lee counties. See also Tampa installation, Pinellas Park installation, cantilever racking, and teardown & removal.
Upright frames, step and box beams, wire decking, row spacers, and pallet supports — the backbone of most warehouses.
Columns, bases, arms, and bracing for pipe, tube, lumber, and sheet goods. More on cantilever racking.
Second-hand warehouse shelving when it fits the job, plus column protectors, end-of-aisle guards, and safety pins.
We match beam connectors to frame style so mixed lots go up right, and we won't mix components that weren't built to work together.
Moving, downsizing, or a building full of rack you don't need? We buy usable pallet racking and cantilever across Tampa Bay and the Gulf Coast.
Photos, rough counts, frame height and depth, and beam length. Five minutes on the phone works too: (813) 363-6903.
Condition, style, and quantity set the offer.
Teardown, banding, palletizing, and load-out by our own crew, so your floor is clear. If you're also buying new or used rack from us, the value of your old steel can be credited against the new install.
Everything we buy, what to send, and how fast we can get it out: sell your used pallet racking.
It can be — when it's inspected before it goes up. We check frame and column condition, beam connectors and safety pins, confirm load capacity against the original manufacturer's spec, and match decking to your actual load. Anything we wouldn't put our name on doesn't get installed.
It depends on the components and what's available, but quality used selective rack commonly runs well below new. Our Tampa Bay racking cost guide breaks down what moves the number.
Yes. A lot of jobs use used frames and beams with new decking or accessories. Every quote shows exactly which components are new and which are used, so there's no guessing.
Usually, if it's in usable condition. Send photos and rough counts, or call, and we'll take a look. When we buy it, our crew tears it down and hauls it out — and on a new install, your old steel can be credited against the new one. See selling your rack and teardown & removal.
We source used rack to the job rather than selling off a yard, so what we quote fits your space, your pallets, and your forklift. Tell us what you need and when, and we'll tell you what's available.
Yes, when it fits the job — along with decking and safety accessories. It's all spelled out in the written quote.
If you're in the Tampa Bay area, yes. We're based in Tampa–St. Pete and supply and install used pallet racking across Hillsborough, Pinellas, Pasco, Polk, Manatee, Sarasota, Charlotte, and Lee counties.
Yes. We'll assemble what you have and tell you honestly if any of it shouldn't go back up.
Free walkthrough & written quote
Warehouses, buildouts, dealers, and small shops — one call gets a walkthrough on the calendar, usually the same week.
info@collinscoastalco.com · Response within one business day